DIY Closet Door Makeover



We are almost finished with our Master Bedroom Remodel. Just a few more minor touch ups and we should be able to share final pictures. Our biggest hold up...the closet doors. They were cheap, boring and didn't really add anything to the room. Take a look...

Really brown and boring, real classy next to the TV stand

Here's a close up

They definitely needed work and I didn't want to just paint them because then they would be cheap and boring, but in a different color. I wanted to add mirrors but the doors are a really odd size and we would have to spend a fortune to get large enough mirrors cut to size or it would look really out of place.

Also, we have a bunch of 12" x 12" and several smaller mirrors we bought at IKEA as decorations for our wedding and I have been looking for ways to incorporate them. (We did use the little ones as a back splash when we remodeled our bar last year. Click here for pictures of the finished bar)  We tried several different designs and nothing looked good or would fit with the door knob holes. I was getting a little irritated, but didn't give up.

I scoured the internet and Pinterest for several weeks but wasn't finding much that would work with our doors. I was starting to get a little obsessive but then I saw a front door with a design I really liked and thought, I might be able to recreate this with our mirrors (see the purple doors below).

So I went down stairs, got the mirrors out and played around until I got it the way I liked...then all I had to do was convince Brian :) I believe there was an eye roll or two, but he knows that once I've set my mind to something, we're going to at least try it. (I am a Taurus, what can I say)

So take a look at how we turned our cheap, plain closet doors into a work of art:

Start of by removing the hardware, sand, clean, prime and paint.

2 coats of primer, 2 coats of paint

Paint the back side first and finish with the front side of the doors

We started painting the doors at the beginning of the remodel, that way they had plenty of time to set. Then we got out all the mirrors we had and started arranging them the way we wanted on the door.

Trying to arrange them evenly and to not cover up the door knob hole

The doors are really light and pretty much hollow, except for where the door knob hole is it's solid. Of course, the hole is located pretty far from the edge and not even at all, so we really had to find a design that we could use that could work around this hole. We thought about drilling another hole but were worried we might split the door. 

Then we went to the hardware store to find some trim that was pretty light weight and would fit around the mirrors. Then we set the trim around the mirrors to make sure it would fit.

Fitting and measuring the trim

Here are the smaller mirrors we planned to use

Since we had to put 4 smaller mirrors together, we had a lot of seams that showed, so we decided to use the smaller mirrors and put them on top of the 4 larger ones. Then we would cover everything with trim. We set the small mirror on top of the 4 larger mirrors in the middle. Then we created frame pieces, all cut at 45* for the larger 4 mirrors and the one smaller mirror. Here is the rough cut picture once we put the frame pieces together:

5 mirrors and some trim

 We really wanted to cover up the lines, so we used blue painters tape so we could get a better visual of what we wanted it to look like.

The tape helped with the visual

 Once we had the design we laid out the rest of the mirrors and realized we were short 2 large mirrors. Luckily Hobby Lobby is up the street and they had 12" x 12" mirrors so we picked 2 more up. They were beveled and slightly larger, but with the trim we used would be able to mask that.

We decided it would be easier if we used duct tape to tape the 4 larger mirrors together so we could cut the frame pieces down to fit tight around them.

The white duct tape, from my promotions days, is hands down the best duct tape ever invented. They only sell it at Strasser Hardware in downtown KC. This picture is the one with 2 IKEA mirrors and 2 beveled Hobby Lobby mirrors

Once Brian got the first frame cut perfectly for the 4-mirror set, he cut 20 more the exact same size. Then did the same with the frame for the smaller mirrors. After that, we measured out the mirrors so they were even all the way across the door and used tape as markers so we could start gluing.

Setting the mirrors in place

 We would recommend using Liquid Nails to glue the mirrors to the door.

Liquid Nails...you can find this at most hardware stores

 To make it easy, we lifted up one side of the mirrors, added Liquid nails, set down the side carefully and then did the same thing on the other side.

Gluing the mirrors

 Once you glue the mirrors down, let them set for 24-48 hours at room temperature (definitely warm or room temperature...we will get to why later).

Let the glue dry and everything set for over 24 hours!

 When we did the back splash on our bar, we attached the mirrors to the drywall with the double-sided foam adhesive squares that came with the mirror. They have held up for almost a year now so we thought we would try and use those again for attaching the smaller mirror and the trim. It was a whole lot easier than using glue!

Double sided adhesive...thanks IKEA!

 We added the adhesive to the smaller mirrors first and centered them on the 4 larger mirrors.

Centering the small mirrors

 Next, we added the double sided foam adhesive to all the trim pieces, cutting them in half to fit.

Adding the adhesive to the trim

 Then we framed the larger mirrors with trim.

Finished with the outer pieces

 Once all the outer trim was done, we started working on the smaller mirror frames.

Smaller mirror frames

Close up

 Then we measured the length between the larger frame and smaller frame so we could cut the flat trim pieces. We cut a little piece at a time to make sure there was a tight fit.

Almost done!

 Then Brian went through and caulked all the edges and sealed the frames. Once the caulk was dry he painted the frames the same white paint we used on the door.

With a little caulk and paint

We let the paint dry for most of the afternoon and then it was time to bring them upstairs to hang. That's when everything went wrong. Saturday was a beautiful 75*, sunny and amazing out. We had spent most of the day outside and glued the windows to the doors and let them set. Pretty simple, right? Wrong. Because Kansas weather in the spring is anything but normal, overnight the temperatures outside dropped below freezing, we got some snow and the high on Sunday was in the mid-30's. It happened so quickly, we forgot to turn on the heat until Brian woke up early on Sunday freezing.

We didn't think it would affect any of the work because everything had been setting for several hours and when we added the trim there wasn't any movement so we thought the glue had set. We were really wrong. Brian carried the doors upstairs and just as we were adding the first hinge, the bottom 2 mirror clusters started sliding down! It was a mess! The glue wasn't able to set all the way and the mirrors were heavy enough when they were vertical that they slowly slid right off. I didn't get any pictures because I was almost in tears and being a little dramatic.

Luckily, Brian keeps a cool head and he got the mirrors reset and fixed everything while I had my mini-meltdown :) We kept the doors upstairs and let them set for another 48 hours. The doors were super heavy, so I was still a little nervous that they would be too heavy to hang. I think we both held our breath while Brian was screwing in the first couple of hinges.

Then...drum roll, please...we got them both up!

Finished doors

Here is a longer view

I am so excited about how they turned out! And we reused our wedding mirrors, so we only spent $35 on the trim, the 2 Hobby Lobby mirrors, Liquid Nails and the new knobs! Not too shabby! And the mirrors add extra light and make the room seem even bigger!

We found these at Hobby Lobby at 50% off!

 Here are a couple of before and after shots (mouse-over for the after view):

We'll have more pictures once we start getting everything back in. Hope everyone haves a wonderful week!

XOXO,

Sara, Brian & Tequila

A Hutch Life: Bedroom Furniture Makeover

It's snowing again! Luckily we were able to get the rest of the outside work (cutting, moving, etc.) done so that we could move everything else inside. I mentioned Brian was working on the crown moulding in my last post and it's all finished and looks awesome! Check it out.

Crown moulding is up!

Another view

It really cleans up the room and Brian is definitely a crown moulding expert by now :)

View from the bed, still messy but we are a work in progress

Now that the crown moulding is up, we decided to move in the completed furniture. Here is a quick look at what we started with:

End tables

Dresser

Here's what a few coats of primer, a couple of coats of really good paint and a quick coat of spray paint can do:

New bedside tables

Our new dresser

I love how they both have come together and look like they are a part of a set. We used a new type of paint, Benjamin Moore ADVANCE Alkyd Paint. It has the application and performance of an oil paint, but it is a waterborne formula that cleans with soap and water. I was definitely a little skeptical at first, but the guy at Zeke's convinced us and I am so glad that he did! It hardened really nicely and the best part, it was a lot less toxic than the Impervo. It also dried a lot faster and you don't need to put any poly or wax on the furniture. The poly would actually harm it, so you get to skip a step! And the best part, it was about 1/2 the cost. I would definitely recommend this to anyone painting furniture that wants a clean and lasting finish. We also used it on the trim and you can't tell any difference between the Impervo trim and the ADVANCE.

But we didn't stop there. When we were in the West Bottoms we found a hutch that someone had painted and I completely fell in love with it. The shape of it and the overall look of the piece was what I didn't even realize I was looking for. The problem, it was over $800 and it had already been painted with distressed chalk paint. I really did not want to spend all that money to repaint it the way I wanted it done. So we decided to try and find something that we could transform ourselves.

That proved to be a little more challenging than we were hoping. All of the hutches we found were meant specifically for dining rooms, so they lacked a lot of drawer space. Since this was going in the bedroom, storage was key for us, so we started looking into dresser bottoms with separate hutch tops. When we found the perfect dresser, we knew we would need to find something with more shape than just a typical hutch top. We asked consignment stores if they ever had any hutch tops that came in and everyone we spoke with said that they typically toss them, if they aren't already a part of the piece. We knew it might be a little difficult to find what we were wanting, so we turned to Craigslist. The good news, there were a lot of hutches for sale...the bad news, most of the hutches were one piece, or if they were a 2-piece set, the top wasn't large enough or detailed enough for what we wanted. Just as I was getting a little discouraged (and let's face it, I am not very patient) we found it...a 2-piece, enormous hutch that was a little scuffed but beautiful. I knew we had to go look at it.

We sent an email and the next morning we got a call from the owner and they said we could come take a look at it down in the West Bottoms.  It was huge! But it was exactly what we were looking for. After measuring we thought that it would be able to work with the dresser that we were picking up the next day. We should have written down the dimensions, but that would have been easy. Then we had to work on convincing the owner to just sell us the top. They didn't want to part with it, but after almost walking away and then telling them we were going to just fix up the bottom to sell it, they caved and we scored and got the top for $200. It was a little more than we wanted to spend, but it was in excellent condition and it was originally $800 on consignment ($1,500 retail).

Then we had to get it home...luckily my dad has a big truck and Brian is really effective at moving, but he can tell you it was not easy.

It barely fit in the truck

Thank goodness my brother lives only a couple miles away and was willing to come over to try and get it out of the truck.Then came the moment of truth...would it fit on top of the dresser?

Nailed it!

 It fit perfectly and left a little room along the front! The other thing we forgot to check was the height...would it even fit in our room? Time to bust out the tape measure

Not the most accurate form of measurement...but it looks like it might work

Here's a view of the hutch top...it's huge with a ton of glass and mirrors.

 If finished, it would be the biggest piece of furniture we have worked on, but worth the challenge. We decided to forgo taping all the windows in lieu of using a razor blade at the end, it saved a lot of time so I would definitely recommend it. It was definitely a challenge because with all of the mirrors and glass, you have to make sure to cover every inch of it. We used 2 coats of primer and 2 coats of the ADVANCE to cover it. Then we had to move it in...with the help of my brother and a few attempts to get the piece through the door, we got it in and...

It fit! 

Holy cow it's a monster, but I love it! Plus we got it in yesterday before it started snowing so we could work on cleaning it up in the warm comfort of our bedroom. Here it is after Brian cleaned off all the paint and polished the mirrors:

Bam! 

 I love it! The piece looks like it was meant to be together and it doesn't take over the room...it's just perfect. Oh, and it has lights! We officially have 6x the lighting that we used to have in our room :) The next step was adding in the shelving. We were fortunate that the shelving was thick glass so we didn't have to paint it at all, I almost forgot what the shelving looked like.

With the glass shelves

The last thing we needed to add were the doors.

With the doors

Another angle

Oh my goodness, I love it, it came together so well and it really is a statement piece in our room. Everything fits in our room well and the room feels so more open than it did. We have some closet doors to finish and we'll be adding the finishing touches, but I am so happy with everything. Here are a couple of before and after shots (mouse-over for the after view):

The Dresser:




The completed piece:



We'll have more to show later this week, but are pretty excited that we are getting closer to being finished. Hope everyone stays safe and warm in this weather!

XOXO,
Sara, Brian & Tequila